All

Showing 169 of 180 out of 9889 results
  • Support Pillar: 1-1/2 X 3

    Support Pillar: 1-1/2 X 3

    SP150L3

    Support Pillar: 1-1/2 X 3

    Progressive's Support Pillars are ground top and bottom to provide consistent support to the mold...

  • Medium Spring (Blue): 1/2 X 1

    Medium Spring (Blue): 1/2 X 1

    MS50L1

    Medium Spring (Blue): 1/2 X 1

    Medium Duty (Blue) Springs are available in a wide range of hole and rod diameters and standard l...

  • Ejector Pin: 1/8 x 10 (Black Nitride)

    Ejector Pin: 1/8 x 10 (Black Nitride)

    EP125L10-BN

    Ejector Pin: 1/8 x 10 (Black Nitride)

    Progressive's Series BN Ejector Pins are proven to reduce hole damage and the frequency of replac...

  • Counterview: Internal Extension, B (Movable) Side

    Counterview: Internal Extension, B (Movable) Side

    CVIN-B

    Counterview: Internal Extension, B (Movable) Side

    Progressive's CounterView monitors mold cycle counts for the life of the tool. A-side and B-side ...

  • Z-Series Top Lock: 1.75 x 3

    Z-Series Top Lock: 1.75 x 3

    TL175X300

    Z-Series Top Lock: 1.75 x 3

    Progressive Top Locks provide positive guidance between cavities and cores. The design allows for...

  • Z-Series Top Lock: 1.12 x 3

    Z-Series Top Lock: 1.12 x 3

    TL112X300

    Z-Series Top Lock: 1.12 x 3

    Progressive Top Locks provide positive guidance between cavities and cores. The design allows for...

  • Mold Safety Strap: 1-1/2"

    Mold Safety Strap: 1-1/2"

    SAFT-150

    Mold Safety Strap: 1-1/2"

    Progressive’s Safety Straps secure mold parting lines during transportation, mold setting, or sto...

  • Ejector Pin: 5/8 X 10

    Ejector Pin: 5/8 X 10

    EP625L10

    Ejector Pin: 5/8 X 10

    Progressive's Series H Ejector Pins are through-hardened with an ion nitrided surface for resista...

  • Ejector Pin: 3/16 X 14

    Ejector Pin: 3/16 X 14

    EP187L14

    Ejector Pin: 3/16 X 14

    Progressive's Series H Ejector Pins are through-hardened with an ion nitrided surface for resista...

  • Date Plug: CH Series Arrow Only for 6mm Ring

    Date Plug: CH Series Arrow Only for 6mm Ring

    DCP06-AO

    Date Plug: CH Series Arrow Only for 6mm Ring

    The CH-Series or "Compact Height" Series Daters allow for installation where space is a concern. ...

  • Date Ring: CH Series Months 4mm

    Date Ring: CH Series Months 4mm

    DC04

    Date Ring: CH Series Months 4mm

    The CH-Series or "Compact Height" Series Daters allow for installation where space is a concern. ...

  • Core Pin (Hard): 1/4 X 3

    Core Pin (Hard): 1/4 X 3

    CPH250L3

    Core Pin (Hard): 1/4 X 3

    Progressive's Core Pins are available in two hardness ranges: -Standard = 30-35 HRC -Hard = 50-5...

Showing 169 of 180 out of 9889 results